If you own a Netgear extender, then you will find different LED lights on the device. It is recommended to have knowledge about all the lights. Having the information about what each LED light indicates will also help you to understand where the problem is, if any occurs by chance. This piece of write-up will provide you with all the necessary information about each LED light on the Netgear EX6100 extender. Almost all other Netgear extenders have similar lights serving the similar purpose. Knowing about these LED lights will also be helpful to you if you have just purchased the Netgear extender and you are trying to configure it for the first time. So, prior to performing Netgear EX6100 setup, let us learn about Netgear extender lights.
Different Lights on Netgear EX6100 Extender
Before learning about what each light mean, let us have a look on what different LED lights are available on Netgear extenders. We would suggest you to be near your Netgear extender while going through the article, so that it is easier for you to relate to the topic and understand it better.
Read more- Guide to Fix TP Link Repeater Slow Internet Connection Issue
Depending upon the different models of Netgear extender, you will see different lights on them. However, the lights more or less remain the same, which are-
-
Power Light
-
WPS Light
-
Client Link Light
-
Router Link Light
-
Router Arrow Light
-
Client Arrow Light
What Each LED Indicates?
Now, let us understand what each netgear extender light indicates.
Power Light on Netgear EX6100 Extender
The first light that we will talk about is the Power LED. It has two colours, green and amber. Green LED indicates that the Netgear extender is powered on. Amber LED indicates that the extender is booting. No light means the Netgear extender is powered off. In case, the LED is off even post turning the extender on, then there might be certain connectivity related issue.
WPS Light
WPS LED light is usually solid green or blinking green. Solid green light shows that WiFi security is enabled for Netgear extender. Blinking green generally indicates that WPS connection is being established. If the WPS light is off, it means WiFi security is not enabled. This light will be of great help while you are trying to perform Netgear EX6100 setup using WPS method.
Client Link Light
Client link light is either green or red or amber. The Client Link light indicates the status of the connection between the Netgear EX6100 and the devices like mobile, laptop or computer, etc. The green client link light shows that the extender has optimal connection with the other devices. The red client link light indicates poor connection to the devices. To get this problem resolved, you may try bringing the devices closer to the extender or reboot the Netgear extender. If the client link LED is amber, it means that the extender has good connection to the device.
Router Link Light
Router link light represents the status of the connection of router to the Netgear extender. This light is either green or red or amber. A green router link light represents optimal connection to the extender, a red router link light means poor or no connection to the extender. An amber router link light also shows a good connection between both the devices. If the light is off that means there is no connection between the router and the Netgear extender. However, if the light is off, despite establishing link between the devices and both router and Netgear extender are on, then you may need some troubleshooting. In fact, you may need to re-establish connection between the router and Netgear EX6100. You can do so either via mywifiext setup method or via Nighthawk app.
Router Arrow and Client Arrow Lights
These two lights are green in color. If any of the two lights are blinking, that means there is certain issue with the devices. It usually happens when the location of Netgear extender is not at the right place. Either the devices are too far from each other or very near to each other. Try changing the position of the Netgear extender to get this problem resolved. The best position for the extender is a central place between the router and the devices which you are trying to connect using the Netgear extender.
Read more- An All-Encompassing Guide on Best WiFi Routers and Extenders
Conclusion for Netgear EX6100 Extender
This was all about various Netgear EX6100 Lights and their meaning. It is always advantageous to have good understanding about the devices that you are using. Now that you have all the required information about LED lights on Netgear EX6100, you will be able to handle any issues when necessary.
